RFID-Antenna
   

MOTOROLA AN200 RFID ANTENNA

Features and benefits
  • Motorola AN200 RFID Antenna (Outdoor, Left) For The Ar400 and Xr400
  • Brand Motorola
  • Model AN200
  • Polarization Left Circular
  • Gain 6 dBiL
  • Connector Type N Female
  • Read Range Far Field
  • Frequency Range UHF
  • Environment Outdoor
  • Form Factor General Purpose

Details
  1. Notices and Disclaimers
    • The AN200 will perform reasonably well in EU frequency in most applications.

  2. Performance Characteristics
    • Nominal impedance: 50 Ohm
    • Power: 20 watts (max. input)
    • Front to back ratio: less than 10 db
    • Frequency range2: 902-928 MHz
    • Gain: 6.0 dBi linear
    • Axial ratio: less than 3 dB
    • Voltage Standing Wave Ratio (VSWR): 20 dB (1.22)

  3. 3. Physical Characteristics
    • Connector: Type "N" Female
    • Polarization: LHCP or RHCP
    • Single port: Yes
    • Dimensions (with mounting screws): 11.1 x 11.1 x 1.9 in. (28.19 28.19 x 4.83 cm) H x W x D
    • Weight: 3 lbs (1.26 kg)
    • Connector position: Rear
4. User Environment
  • Temperature shock test: IEC-68-2-14 (-40° rising to 158° F/-40° rising to 70° C)
  • Humidity test: IEC-68-2-30 (77° to 104° F/-25° to 40°
  • Random vibration test: IEC-68-2-6 (10 to 150 Hz, 05 g, 1 hour in each of 2 axes)
  • Environmental sealing: IP54
  • Heat test: IEC-68-2-2 (158° F/70° C for 24 hours)
  • Salt fog test: IEC-68-2-11 (96 hours, repetitive cycling)
  • Outdoor use: Yes
  • Operating temperature: -40° to +149° F (-40° to +65° C)
  • Cold test: IEC-68-2-1 (-40° F/-40° C for 24 hours)
  • Rain test:IEC-68-2-18 (8 hours minimum in rain chamber at 43 psi)
  • Temperature shock test: IEC-68-2-14 (-40° F rising to 158° F (-40° C rising to 70° C) in 10 cycles of 60 minutes each)
  • Humidity test: IEC-68-2-30 (77° to 104° F (-25° to 40° C)), 24 hour cycles of 90% relative humidity
  • Impedance: DC: 10 kOhm +/- 5%

MOTOROLA-SYMBOL AN400 RFID ANTENNA

Features and benefits
  • Axial ratio: less than 3 dB
  • Isolation -37 db
  • Gain 6.0 dBi linear
  • Frequency range2 902-928 MHz
  • 3 dB beam width 60°
  • DC resistance 10K Ohm
  • Voltage Standing Wave Ratio (VSWR) 1.25



Details
  1. Notices and Disclaimers
    • The AN200 will perform reasonably well in EU frequency in most applications.

  2. Performance Characteristics
    • Axial ratio: less than 3 dB
    • Isolation: -37 db
    • Gain: 6.0 dBi linear
    • Frequency range2: 902-928 MHz
    • 3 dB beam width: 60°
    • DC resistance: 10K Ohm
    • Voltage Standing Wave Ratio (VSWR): 1.25
3. Physical Characteristics
  • Dual port:Yes
  • Dimensions (with mounting screws): 28.3 x 12.5 x 1.5 in. (71.7 x 31.7 x 3.8 cm) H x W x D
  • Casing: Aluminum with polycarbonate cover
  • Weight: 8 lbs. (3.6 Kg)
  • Polarization: Two circular polarized patch array
  • Connector: Type "N" Female

4. User Environment
  • Operating temperature: +32° to +122° F (0° to +50° C)
  • Environmental sealing: IP54
  • Storage temperature: -4° to +158° F (-20° to +70° C)

ALIEN ALR8696C

Benefits
  • Wide band antenna
  • A thin antenna with no protrusions
  • Built to keep the elements out
  • Highly efficient antenna

Features
  • Extremely low VSWR and axial ratio
  • Wide band antenna for worldwide applications
  • Low Profile
  • Weather and UV resistant radome
  • 20 ft. cable with reverse polarity TNC connector
  • RoHS EU 2002/95/EC compliant

Impinj Brickyard Antenna

Features
  • Range: Short (30-45cm)
  • Dimensions: 29.5cm D x 6cm
  • ETSI and FCC models available

Description
  • The versatile Brickyard antenna with its confined, short-range read zone has application in point-of-sale terminals, apparel markets, document control, and library systems.

Impinj Threshold

Features
  • Range: Long (4x3m)
  • Dimensions: 46x9x2cm
  • ETSI and FCC models

Details
  • Initially designed for boundary/threshold crossing applications, the Impinj Threshold antenna has a very wide beam width to maximize zone coverage. Threshold antennas provide a consistent and continuous read zone when linearly distributed head-to-tail. At 46 x 9 x 2 cm, the Threshold antenna’s planar form factor fits readily onto fencing or other borders.

  • This antenna has two part numbers, each designed for use in a specific region:
    1. IPJ-A0311-EU1 (ETSI)
    2. IPJ-A0311-USA (FCC)

AN480 RFID Antenna

Features and Benefits
  • To offer the maximum flexibility performance
  • Compatible in virtually any global market
  • Can be installed throughout the enterprise in manufacturing and warehouse floor environments or any dock door receiving application
  • Can be offered a low axial ratio that delivers a more uniform gain for superior performance

Description
1. Performance Characteristics
  • Frequency range2: 865-868 MHz
  • Max. VSWR free space: 1.22:1
  • Nominal impedance: 50 Ohm
  • Axial ratio: less than 1.5 dB
  • DC resistance: 10K Ohm
  • Power: 2 Watts
  • 3dB beam width: 65° (Horizontal and vertical)
  • Gain: 6.0 dBi linear
  • Max. VSW ground at .15 meter: 1.3:1
  • Front to back ratio: 18 dB
3. Physical Characteristics
  • UV rating: F2 per UL 746C
  • Transport vibration: IEC-68 series
  • RoHS compliant: Yes
  • Environmental sealing: IP54
  • Outdoor use: Yes
2. Physical Characteristics
  • Weight: 2.5 lbs (1.13 kg)
  • Polarization: LHCP and RHCP
  • Single port: Yes
  • Connector: Type "N" Female
  • Dimensions (with mounting screws): 10.2 x 10.2 x 1.98 in. (25.91 x 25.91 x 5.03 cm) (Without mounting screws: 10.2 x 10.2 x 1.32 in. (25.91 x 25.91 x 3.35 cm)

條碼掃描器 | 條碼打印機 | 標籤 | 證卡打印機 | 系統及軟件
Unit6 8/F Kingsford IND CTR, 13 Wang Hoi Rd, Kowloon Bay, KLN, Hong Kong
地址 : 香港 九龍灣 宏開道13號 景發工業中心 8/F 6室 

Opening Hour: 11:00 – 19:00
取貨時間: MON-FRI 12:00-19:00 , 公眾假期及周六,日休息
Operation: 35419718 / 93653118

© 2007 Central Link Technologies Limited 版權所有,不得轉載。